適用場景
- 工程機械運輸
- 大型設備轉運
圍繞實際工況選擇配置
圍繞實際工況選擇配置
重點配置
- 平台尺寸
- 爬梯形式
- 固定裝置
採購前確認
- 目的國家及當地法規
- 作業環境、載荷與頻率
- 底盤、排放與認證要求
在售車型
平板運輸車車型
選購指南
選購指南
Flatbed transport vehicles are an ideal choice for transporting construction machinery and equipment, featuring a low-bed design that facilitates self-loading and unloading of construction machinery. Optional auxiliary equipment such as hydraulic ramps and winches can be installed to accommodate the transport needs of different equipment types.
Flatbed platform ground clearance is only 0.8–1.2 meters, allowing both tracked and wheeled construction machinery to drive on and off by themselves. The platform length is 6–12 meters, width is 2.5–3 meters, and load capacity is 10–60 tons, covering the transportation needs of the vast majority of construction machinery.
可選裝液壓爬梯（後翻或側翻）輔助設備上下車，可選裝電動或液壓絞盤用於牽引無法自行行駛的設備。平板表面可加裝防滑花紋板和貨物固定環，保障運輸安全。
Widely used in the cross-regional transportation of construction machinery such as excavators, loaders, road rollers, bulldozers, and rotary drilling rigs. Export models can be adapted to emission standards and flatbed configurations according to the regulations of the destination country, meeting the transportation needs of overseas engineering projects.
熱門問題
熱門問題
平板運輸車是否需要辦理超限運輸證，取決於其裝載後的總尺寸、總重量或軸載是否符合法定限制。若車輛或貨物超過法定標準，例如總高度超過4米、總寬度超過2.55米、總長度超過18.1米，或總重量超過49噸，則必須依法申請超限運輸證。若未超過標準，則無需辦理。請依據實際裝載情況核對相關規定。
When the width of the flatbed trailer exceeds 2.55 meters or the length exceeds 18.1 meters, a permit for oversized transport vehicles must be obtained. It is recommended to confirm whether the overall dimensions of the vehicle and cargo comply with the standards before transportation.
獲取配置方案